cciefun ccie/sp fortiOS linux tcl/tk avalanche/reflector canada immi, visit

Howto modify .tcc file to suit local lab

a, open the config file. Don't automatically reserve the port
b, Action->Relocate port->select port and next. use local chassis port to replace the original port




Howto do arp resolve on TestCenter
1, right click HOST icon and click start "ARP/ND"







By default, fixed frame lenth is 128 and that will cause performance issue. use big packet instead


howto create tcc file step-by-step
a, create Host
-> need to config host counts, ipv4 address range and gateway. Right click the host icon, you can send arp request to resolve gateway's mac.
b, create traffic.
-> schedule: Rate Base. we can specify percentage value
-> Traffic pattern: pair
-> tx: port1/2 rx: port 2/1
-> load: 50%
-> Destination: 192.168.200.0/24
-> Frame Length: change the default fix frame from 128 to 1500. Otherwise the packet lost will be found.

howto add UDP header to the traffic

1, without this header, FGT will drop some packets and the test result compromised.